Requirements For The Installation Location - BYD MINI ES-P30B3-AU-R2 Installation Manual

Qualification
A qualified electrician is a person who possesses the required knowledge, technical
training and experience, to conduct the following:

Setting up, activating, deactivating, disconnecting, grounding, short-circuiting and
repairing electrical circuits and devices.

Standard maintenance and use of protective devices defined in the safety standards.

Administering first-aid to injured parties.

Compliance with local regulations, applicable standards and directives.
Responsibilities
The electrician shall ensure that:

The general information, step-by-step instructions and the safety instructions
regarding assembling and installation are read and followed all the time.

Neither the physical size nor the rated current value of fuses can be changed

Before performing any electrical work , suitable measuring equipment shall be used to
ensure the device is in accordance with applicable directives

Do not open the device during operation

2.3 Requirements for the installation location

Always select a suitable location before installation. You shall ensure that the
installation location meets the following conditions:

Sufficient ventilation and dry environment (max humidity is 95%)

The range of room temperature is 0℃ ~ + 40℃

Protected against penetrating water

Always install away from highly flammable (e.g. paper) or explosive materials (e.g.
fuel, paint)

Mounting surface shall be capable for supporting the total weight of the device: 96kg
(3kWh system)

Minimum clearance from the wall (15 cm)

Keep the distribution board at a reasonable distance from the MINI ES system
installation. Only 10m connection cable is provided for each CT. Cable extension
requires extra cost, maximum cable extension is 10 meters
Access authority

Children shall be accompanied by an adult if they are in the installation room

Children shall not operate the storage system
12