Transporting To The Installation Location - BYD MINI ES-P30B3-AU-R2 Installation Manual

NOTICE!
· Do not directly install the device at severe weather condition.
· Do not use the device for medical equipment.
· If equipment is deformed, broken or appears abnormal sounds or smell, please
contact with the authorized service provider immediately.
· If equipment is faulty or do not operate normally, please contact with the
authorized service provider right away.
· Keep minimum space for inspection and service.
· Please contact with BYD authorized provider if regular maintenance is needed.
· Please keep the system fully charged if prepare to leave the device unused for a
long time,.
· Please contact with BYD authorized service provider when the device needs to
be relocated.
· This equipment is allowed to be installed indoors only, please do not install
outdoors.
· This product is allowed to be used in Australian area. If there are any other
special requirements, please contact with the manufacturer for prior approval.

3. Transporting to the Installation Location

Risk of injure due to heavy weight
The weight of the components may cause injury during installation, disassembling
and transportation.
· Please remove tripping hazard before installation.
· Transport and install the components With at least two people.
· Transport the device with a appropriate lifting device.
WARNING!
Material damage caused by condensation
If the device is moved from a cold environment to the installation location,
condensation may occur and cause damage to the electronics.
· Only transport the device at T between 0 ° C to +50 ° C.
· A maximum relative humidity of 95% (non-condensing)
· Before commissioning, the device shall be installed in a dry condition.
19