System Transportation; Remove The Packing - BYD MINI ES-P30B3-AU-R2 Installation Manual

DANGER!
If the external package has been damaged, it is possible the device or the internal
components have also be damaged during the transportation.
· Make a record and check the packing list carefully after removing the external
package.
· If the component is lost or damaged, the customer has the right to reject or ask
for replacement.
4.4 System package

The system is packed in wooden boxes. The internal PE bags are moisture-proof and
waterproof.

EPE foamed cotton pad is used in the middle to prevent the system from being
damaged during handling and transportation.

4.5 System transportation


The system must comply with UN3841 (transportation regulation for dangerous goods)
and the local laws and regulations.

The weight of the system is heavy so that the transportation must be carried by
machinery.

Transportation temperature:-10℃ to 40℃.

The system and packaging cannot be wet, so it cannot be transported in the open air

4.6 Remove the packing

Unpacking steps
The MINI ES is packed in a wooden case. There are totally sixteen (16) buckles on the
wooden package that need to be removed. Needle nose pliers and a straight blade
screwdriver are recommended to remove the buckles.
Buckles are shown as below:
22