Minies Fixing - BYD MINI ES-P30B3-AU-R2 Installation Manual

Check out the packing list
The MINI ES is enclosed in a wooden case which includes other goods to be delivered. It
is forbidden to open the wooden case during transportation to the installation site. If
components are lost or damaged, the customer has the right to reject or ask for a
replacement. The packing list is shown as below:
Num.
1 MINI ES
2
Current Transducer (CT)
3 User Manual
4 Installation manual
5 Factory Inspection Report
6 DRED
NOTICE!
· Confirm the MINI ES model you received shall keep consistent with the one you
ordered.
· The position of distribution board shall not be too far. The MINIES must be
installed near to the distribution board. Each CT comes with 10m cables which
may be extended an additional 10m if required a extra cost.

4.7 MINIES fixing

The minimum distance between MINI ES and barrier is 150mm (5.906 inches).It points the
back and the right of the MINI ES
Name
1pcs
2pcs
1pcs
1pcs
1pcs
1PCS
Qty.
MINIES-P30B3-AU-R2
Each CT with 10m cable used
for collecting current data.
150mm
25
Remark