Finishing Off - BYD MINI ES-P30B3-AU-R2 Installation Manual

1 POWER
2 LOCAL
On-grid forced charge

Close the MINI ES circuit breaker for the AC grid to supply power to the MINI ES.

Hold "REMOTE" and "LOCAL" button at the same time for 10s. Then "REMOTE",
"LOCAL" indicators all keep on, the system will start forced charging mode.

While charging, let MINI ES operate for more than 15mins before using APP to search
system data; if App works normally and displayed data correspond to
situation, trial test is completed. Complete the check list.

Record results as follows:
No.
APP main interface
1
displays grid power data.
APP main interface
2
displays photovoltaic
power data.
 If APP data is correct, hold "REMOTE" and "LOCAL" button for 5s, "REMOTE"、
"LOCAL" and "POWER" indicators are all off, forced charge mode is finished.
 Long hold "POWER" button for 10s, "POWER" indicator will be off, and the system will
be turned off.

4.11 Finishing off

Before starting recovery the system, firstly disconnect MINI ES grid power and turn off the
system.
DANGER!
· Before installing sideboard, please make sure energy storage system has
already been turned off And denergised.
keep on
keep on
Forced charge data
Contents Requirements
Cannot be "0" if
grid is presented
Cannot be "0"; if
inverter is
generating power
49
the actual
Results