Acer Altos T350 F2 Faq page 63

Altos T350 F2 FAQ (Frequently Asked Questions)
select the "Locate" option and click Go
RAID utility in Windows/Linux:
•
a. Launch the RAID utility
b. Click the physical HDD desired in Physical tab
c. Right click the on the HDD. Then, select "Start Locating Drive"
To stop the LEDs from blinking, select "Stop Locating Drive"
18. What is the default setting of disk write cache of MegaRAID?
ANSWER: The default setting of disk cache of virtual drive is Unchanged.
19. How do I enable/disable disk write cache of MegaRAID?
ANSWER: You can enable/disable disk write cache through RAID BIOS Utility during POST or
RAID utility in Windows/Linux.
RAID Utility in Windows/Linux.
•
a. Please launch the RAID utility in Windows/Linux.
b. Right click the Virtual Drive in Logical panel
c. Click Set Virtual Drive Properties
63