Acer Altos T350 F2 Faq page 59

Altos T350 F2 FAQ (Frequently Asked Questions)
Operating Systems
Server 10
VMware ESXi 5.0
NOTE 1. The RAID Utility cannot be installed on VMware ESXi 5.0 host. Please install VMWare
SMIS Provider on VMware ESXi 5.0 host instead.
4. Where should I connect the SAS or SATA cables to MegaRAID?
ANSWER: Please connect the SAS cable to mini SAS 4i connector (SFF-8087) on the card.
MegaRAID 9260-16i
•
5. How do I know the version of BIOS and firmware of MegaRAID?
ANSWER: You would see below MegaRAID 9240-4i related information during POST:
LSI MegaRAID SAS-MFI BIOS
Version 4.24.00
Copyright(c) 2010 LSI Corporation
HA –0 (Bus 2 Dev 0) LSI MegaRAID SAS MR9240-4i
FW package: 20.10.1-0037
Battery Status: Not present
PCU SLOT ID
-------- --
1
0 Virtual Drive(s) Found on the host adapter.
0 Virtual Drive(s) handled by BIOS
Press <Ctrl><H> for WebBIOS or press <Ctrl><Y> for Preboot CLI
Service
Pack
N/A
(Build June 03, 2010)
LUN VENDOR PRODUCT
--- ------- -------
LSI LSI MegaRAID SAS MR9240-4i
32-bit/
Driver
64-bit
32-bit Yes
64-bit Yes
59
RAID
Note
Utility
Yes
No 1
REVSION CAPACITY
------- --------
0MB