Acer Altos T350 F2 Faq page 12

Altos T350 F2 FAQ (Frequently Asked Questions)
For connection mode:
Concurrent (Default): All of onboard LAN port 1, onboard LAN port 2 and optional dedicated
•
server management port can be used for management with different IP address. All NIC
ports must be on different subnet.
Failover: All of onboard LAN port 1, onboard LAN port 2 and optional dedicated server
•
management port are bonded together. The setting of onboard LAN port 1 will be used
for bonding. If a connection fails, Smart Console connection will switch to the others.
Failover mode can be enabled in Smart Console.
8. How do I configure the IP address of BMC on Altos T350 F2?
ANSWER: Please enter BIOS Setup during POST.
a. Please select Server Management.
b. Please select BMC LAN Configuration.
c. You would see information below.
Baseboard LAN configuration
IP Source
IP Address
IP Subnet Mask
Gateway IP
Intel (R) RMM4 LAN Configuration
Intel (R) RMM4
IP Source
IP Address
IP Subnet Mask
Gateway IP
d. Please specify IP address, IP Subnet Mask, and Default Gateway under Baseboard LAN
configuration for share NIC of onboard LAN port 1.
e. If Altos T350 F2 is installed with Dedicated Management Port, please specify IP address,
IP Subnet Mask, and Default Gateway under Intel (R) RMM4 LAN configuration
f. Please save the settings and exit from BIOS Setup.
9. Can Altos T350 F2 BMC use the same IP address as the one in operating system?
[Static]
010.036.060.100
255.255.255.000
010.036.060.001
Intel (R) RMM4+DMN
[Static]
010.036.061.100
255.255.255.000
010.036.061.001
12