Menu: Service; Alarm Simulation; Device With Hart Protocol - ABB LST300 Operating Instruction

38
Menu / Parameter
Calibrate / Calibration / Dry
Lower Sensor Point
Upper Sensor Point
Lower Level Point
Upper Level Point
Calibrate / Calibration / Wet
Lower Sensor Point
Upper Sensor Point
Lower Level Point
Upper Level Point
Wet Calibrate Lower
Wet Calibrate Upper
Calibrate / Linearization
Linearization Table
Active Table
Max Flow
Max Volume

Menu: Service

Refer to the service manual for more details .

Alarm Simulation

Device with HART protocol

Software SWxxxxxxxxx
Software version
00.00.01
L S T 3 0 0 | C O M PA C T U LT R A S O N I C L E V E L T R A N S M I T T E R | L S T 3 0 0 – E N R E V. E
Value range
0 to 12000 mm
0 to 12000 mm
0 to 12000 mm
0 to 12000 mm
Display Only
Display Only
0 to 12000 mm
0 to 12000 mm
-
-
-
Disable, Enable
0 to 9999990000.0 m 3 /h
0 to 9999990000.0 m
3
Type of changes
Original
Description
Lower sensor point for level calibration
Upper sensor point for level calibration
Lower level point for level calibration
Upper level point for level calibration
Result lower sensor point for level calibration
Result upper sensor point for level calibration
Lower level point for level calibration
Upper level point for level calibration
Wet calibrate lower sensor point
Wet calibrate upper sensor point
Linearization Table configuration interface
Enable or disable the linearization table
The maximum flow value of the channel
The maximum volume of the vessel
Operating instructions
OI/LST300-EN Rev. B