Avaya Virtual Services Platform 7000 Series Installation Manual page 43

3. Select a base unit for the virtual fabric. Use the base unit switch to configure one
4. Connect AC power.
VSP 7000 installation
Callout Description
3 FI cable connector pull tab (Ensure that the cable connector
pull tab is facing UP.)
Figure 22: Installing Fabric Interconnect cables detail
unit as the base unit.
Important:
You must designate only one unit in a virtual fabric as the base unit. The base
unit switch of all the other units must be in the non-base position.
If you assigned the base unit and non-base units with the units powered on, you
must reset the virtual fabric for the assignments to be applied.
Installing Fabric Interconnect cables
April 2012 43