Avaya Virtual Services Platform 7000 Series Installation Manual page 33

2. View the status LED states to verify that the fan trays and power supplies are
VSP 7000 installation
installed and operating correctly. You can also verify the status and operating mode
of the switch.
For status LED state descriptions, see the following table.
Table 1: Status LED descriptions
LED
Base Off
Amber (Solid)
Amber (Blinking)
Amber (Fast Flashing)
Emerald (Solid)
Emerald (Blinking)
Status Off
Amber (Solid)
Amber (Blinking)
Emerald (Solid)
Emerald (Blinking)
Up / Down Off
Amber (Solid)
Checking LEDs to verify switch installation
State
The switch is operating in
standalone mode. If in a virtual
fabric, the switch is not a Base unit
or a Temporary Base unit.
The switch is operating as the
Temporary Base unit.
The switch has a Base unit election
problem. Multiple switches are
configured with the Base unit switch
on, or no switch has the Base unit
switch on.
The switch did not join the virtual
fabric. Refer to the switch log for
more information.
The switch is operating as the Base
unit in a virtual fabric.
The switch joined the virtual fabric
and Automatic Unit Replacement is
upgrading the diagnostics, agent, or
configuration file.
The switch is not operating.
The switch encountered an error
during diagnostics.
The switch is booting. During boot
the switch executes the boot loader
and diagnostics.
The switch is operating normally.
Agent software is loaded.
The switch is loading the agent
software.
The switch Fabric Interconnect Up /
Down cable is not detected or
connected to an adjacent switch.
The switch Fabric Interconnect Up /
Down cable is detected and
Description
April 2012 33