Changing Parameters (Cooling Part) - Valmar MULTY P TTi Series Handling, Operating And Maintenance Manual

9. On display appears the dual inactive Home
page.
Press the BACK button
Press the HOME button
inactive HOME screen.

10.2 CHANGING PARAMETERS (cooling part)

10.2.1 RESET TO THE FACTORY SETTING
The user can restore all the programs, all changes are lost.
1. Press the right part on the dual inactive
HOME page (cylinder) to enter in the single
inactive home screen.
2. On the single inactive home screen press
the TOOLS button
screen.
3. Press the RESET button to enter in the
PASSWORD screen.
4. Enter the password - user code 111111.
to return to the previous screen.
to cancel the operation and return to the dual
to enter in SETTINGS
93