Valmar MULTY P TTi Series Handling, Operating And Maintenance Manual page 109

place the mixer on solid surface and remove each slider from the mixer
individually (push the slider downwards until it jumps off the shaft);
slowly and consistently pull the blockader out of the cylinder; exercise
great care to prevent accidental dropping and consequent damaging of
the blockader;
all removed parts must be cleaned in a mixture of water and disinfection
agent and left to dry. While doing so, please pay special attention to
instructions of the disinfection agent manufacturer as well as hygienic
standards, which are valid in your country.
It is strictly forbidden to put plastic parts of the appliance into the dishwasher to
clean them!
109