Push-Button Panel (Treating - Heating); Keys (Kettle - Heating Part); Start With The Start Cycle Button On The Push-Button Panel; Start With The Start Cycle Button From The Menu - Valmar MULTY P TTi Series Handling, Operating And Maintenance Manual

7.2 PUSH-BUTTON PANEL (TREATING – HEATING)

7.2.1 KEYS (kettle - heating part)

7.2.1.1 key START
7.2.1.1.1

START with the START CYCLE BUTTON on the PUSH-BUTTON PANEL

The START CYCLE button
(except when first using the machine).
1. Press the button
program or the LAST program used.
2. Press START CYCLE
program (NEW or LAST).
3. Program screen.
All menu programs you can started with the START CYCLE button
The end of the cycle is notified by a beep and a light signal (if any). A message
is displayed to take out the mixture.
The machine will continue mixing the mixture without heating until extraction,
i.e. until the end of the maximum time limit.
7.2.1.1.2

START with the START CYCLE BUTTON from the MENU

1. Press the button
program or the LAST program used.
is always set to one of the menu programs
to display the set NEW
again to start the
to display the set NEW
49
.