Touch Screen Of The Cylinder - Valmar MULTY P TTi Series Handling, Operating And Maintenance Manual

1
2
3
4
5
6
7
In programs (heating) when you change the value you change the value in
active step. When the actual step is finished the machine alerts us with an
audile signal and the new note of the steep is show on TUTOR MESSAGE.

7.1.2 TOUCH SCREEN OF THE CYLINDER

7.1.2.1 TOUCH SCREEN (dual inactive home screen right - cylinder part)
1
DESCRIPTION:
1
4
TUTOR MESSAGES help users giving them instructions
and information about the processing. They also provide
information on any errors and give warnings on operations.
UP BUTTON increased the actual value. If the button is grey
the increasing is not allowed.
TEMPERATURE DISPLAY – actual values.
CONFIREM BUTTON confirmed the selected value. If the
button is grey the confirmation is not allowed.
DOWN BUTTON decreased the actual value. If the button is
grey the decreasing is not allowed.
Press BACK to return to the previous screen
TIME DISPLAY – actual values.
2
TUTOR MESSAGES help users giving them instructions
and information about the processing. They also provide
information on any errors and give warnings on
operations. This message refers to upper – kettle part of
the machine.
Press the right part of display
(cylinder) to enter in the single
inactive home screen.
34