Key Heating At 85 Degrees C; Key Stop/Reset - Valmar MULTY P TTi Series Handling, Operating And Maintenance Manual

The HALF-KETTLE HEATING button
which is positionated in the lower part of the kettle. The
switched on during the heating cycle and is active only during the running
program. The function cannot be stored.
Press the button to start a half heating
(lower) of the kettle.
3. On the display show
again press the
disappear so mean that the machine
working with both heaters.
7.2.1.5 key HEATING AT 85° C
The HEATING button
85° C.
1. Press the button
program 26.
2. The machine will start mixing and heating
the mixture up to 85° C. The front display
interacts with users giving them instructions
and information about the processing. The
end of the cycle is notified by a beep and a
light signal (if any). A message is displayed
to take out the mixture. The machine will
continue mixing the mixture without heating
until extraction, i.e. until the end of the
maximum time limit.
7.2.1.6 key STOP / RESET
The STOP button
machine indifferently in which phase the machine is. The HOME screen is
displayed.
picture. If you
button the picture
is pre-set to the program ice cream mixture heating at
to start pre-set
stops all active function, operation, program of the
52
activates the heating only with heater
button can be