Wheel Bolt Caps - Volkswagen PASSAT 2013 Manual

Please first read and note the introductory information and heed the WARNINGS
Pulling off the wheel cover
Take the lug wrench and wire clip out of the vehicle tool kit.
Place the wire clip hook in one of the openings of the wheel cover.
Slide the lug wrench through the clip ⇒
arrow.
Installing the wheel cover
Where applicable: Before installing the wheel cover, the anti-theft wheel bolt must be screwed into
position ⇒
f ig. 208 (2) or
cannot be installed.
Make sure that the valve cutout is aligned with the valve ⇒
the wheel rim. Make sure that the wheel cover is latched onto the rim along the entire circumference.

Wheel bolt caps

Fig. 206 Pulling cover caps off wheel bolts.
Please first read and note the introductory information and heed the WARNINGS
Take the wire clip out of the vehicle tool kit.
Insert the wire clip through the opening of the cover cap ⇒
the arrow.
The caps are designed to protect the wheel bolts and should be installed again after the wheel
change.
The anti-theft wheel bolt has a separate cap. This only fits the anti-theft wheel bolt, but not the
standard wheel bolts.
f ig. 205
(3) in relation to the position of the tire valve. Otherwise, the wheel cover
and pull the wheel cover off in the direction of the
f ig. 208 (1), and press the wheel cover onto
f ig. 206 and pull off in the direction of
.
.