Volkswagen PASSAT 2013 Manual page 31

Main menus Function
Station indicator in radio mode
Audio Track display in CD mode.
Track display in media mode.
Information displays on the navigation system:
When destination guidance is active, turn arrows and
proximity bars are shown. The illustration is similar to the
Navigation
symbol display in the navigation system.
If destination guidance is inactive, driving direction (com-
pass function) and the current street name are displayed.
Phone Information and settings of the mobile phone package.
Current warning and information messages.
Vehicle This menu item is only displayed when warning or infor-
status
mation messages are available. The number of available
messages is shown in the display. Example: 1/1 or 2/2.
Includes the Convenience and Lights & Vision submenus,
Settings
as well as many settings such as time, speed warning for
winter tires, language, units and "Display OFF."
Applicable only in the United States and Canada
MFI menu (Multi-Function Indicator): Premium version
Please first read and note the introductory information and heed the WARNINGS
The MFI menu has 2 automatic trip memories: 1 – single trip memory and 2 – total trip memory.
The number of the memory is shown at the upper right of the display. The trip memories are in addi-
tion to the trip odometer, which is displayed in the bottom part of the instrument cluster and controlled
using the 0.0/SET button on the right of the instrument panel ⇒
To display the distance driven on trips 1 and 2, select the Route item in the MFI menu (MFI >
Route). Press the OK button (⇒
Push and hold the OK button to manually reset a trip memory to zero.
Single trip
1
memory
2 Total trip memory
Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under Settings > MFI data.
Displays that are not enabled will not appear.
f ig. 15) to toggle between Route 1 and Route 2 (trip 1 and trip 2).
The memory accumulates and stores information about distance driven and
fuel used from the time the ignition was switched on until the time it was
switched off.
If the ignition stays off for 2 hours or more, stored information is automatical-
ly deleted. If the trip is continued within 2 hours after the ignition was
switched off, the new values are added.
The memory displays and stores the accumulated driving and fuel consump-
tion data of any number of single trips up to a total driving time of 99 hours
and 59 minutes, and up to a total distance of 9,999 miles (9,999 km), de-
pending on the instrument cluster version. If one of the maximum values is
exceeded, then the memory is automatically cleared and starts again from 0.
⇒ B ooklet
⇒ B ooklet
system
⇒ B ooklet
system
⇒ B ooklet
Phone Package
(7), ⇒
f ig. 10 f ig. 11 (7).
See
Radio
or
Navigation
Navigation
Mobile
.