Settings Menu - Volkswagen PASSAT 2013 Manual

Display
Average speed
0 speed
Oil temp.
Speed warning
--- km/h
Switching between the displays
Use the arrow up and down buttons ( and ) on the multi-function steering wheel.
Storing speed for the speed warning
Navigate to MFI > Speed warning (Speed warning at --- km/h).
Press the OK button to save the current speed and to activate the warning.
If the speed is not right, press buttons
speed within about 5 seconds. Then press the OK button a second time or just wait a few seconds.
The speed is saved and the warning is activated.
To deactivate, toggle to --- km/h and press the OK button. The set speed is deleted.
Some vehicle models also have an automatic speed warning when the vehicle speed reaches 120
km/hr. A message appears in the instrument cluster display, accompanied by a warning chime.
Manually erasing trip memory 1 or 2
Navigate to MFI > Route.
Select the memory to be erased.
Press the OK button for about 2 seconds.
Enabling and disabling displays
Use the Settings menu, submenu MFI data (Settings > MFI data) to enable displays you want to
be available under the MFI menu in the instrument cluster display. The units in which data is displayed
can also be changed.

Settings menu

Please first read and note the introductory information and heed the WARNINGS
Settings menu
Language
MFI data
Compass
Convenience
Lights & Vision
Function
Average speed on trips per trip memories 1 and 2 (toggle). Displayed once
the vehicle has been once the vehicle has been driven about 100 m. Until
then, dashes appear instead of a number. The value displayed is updated
every 5 seconds.
Digital display of current vehicle speed.
Current engine oil temperature (digital display; 3.6 liter engine only).
When the set speed (from 30 to 250 km/h) is exceeded, an acoustic warning
sounds, and a visual message may also appear in the instrument cluster
display.
or
Function
Set language for messages in the display and navigation system.
Select the features you want to have displayed in the MFI menu in the
instrument cluster display .
Calibrating the compass on vehicles without a factory-installed navigation
system. To calibrate, follow instructions in the instrument cluster display.
Convenience function settings.
Vehicle lighting settings.
on the multi-function steering wheel to set a different
.