Please carry out each step only in the order specified:
9.
Replace the burned out light bulb with a new bulb of the same type B.
Reinsert the bulb socket assembly in the taillight assembly. The locking tabs must latch
10.
with an audible "click."
Carefully reinsert the taillight assembly into the opening in the luggage compartment lid.
Hold the rear light assembly with one hand in the installation position, and with the other
11.
hand tighten the fastening screws ⇒
f ig. 220
B (3).
Plug connector plug B
(2)
into the bulb socket and push red locking tab B
(4)
in the
12.
direction opposite to the arrow.
13.
Check the taillight assembly for proper installation and secure fit.
14.
Attach the cover. The cover must latch tightly and securely into place.
15.
Close the luggage compartment lid.
Different models may have different taillights, and the light bulb may be in a different location
than shown in the illustrations.