Table of Contents
Advertisement
(A)
⇒
f ig. 216
Side marker
light
Unscrew the
fastening screw
⇒
f ig. 217
(arrow) with a
short
3.
screwdriver. To
access the
screw, turn the
wheel in
question inward
as shown in .
Remove the
cover from the
4.
wheel house
lining .
On the back of the headlight assembly, pull off the rubber cover for
5.
6.
Left side of the
vehicle: Turn
plastic bulb
socket
counterclockwise
(about 1/8 turn)
to release it.
Right side of the
vehicle: Turn
plastic bulb
socket clockwise
(about 1/8 turn)
instead.
7.
Pull plastic bulb socket assembly back and out of the headlight assembly.
8.
9.
(B)
Low beam
the bulb you are replacing.
Turn plastic bulb
socket
counterclockwise
(about 1/8 turn)
to release it.
Replace the burned out light bulb with a new bulb of the same type.
Reinsert the bulb socket assembly into the headlight assembly.
(C)
(D)
High beam
Turn signal
and parking
light
Press plastic
Same as
tab on back of
column (A).
bulb socket to
release it.
(E)
Daytime
running lights
Same as column
(A).
Same as column
(A).
Turn plastic
cover ⇒
f ig. 216
A
(E)
counterclockwise
and remove.
Same as column
(A).
- Quick Links:
- Instrument Overview
Hide quick links:
Advertisement
Table of Contents
