GPI TM Series Operation Manual page 5

Dimensions - inches (W x H x L):
TM050 2 x 2.5 x 4.3
TM075 2 x 2.7 x 5.3
TM100 2 x 3 x 6
TM150 2.3 x 3.6 x 7
TM200 2.8 x 4.1 x 7.5
Metric Measurement
Unit of Measure: Litre
Flow Range:
TM050 3.8 - 38 LPM
TM075 7.6 - 76 LPM
TM100 19 - 190 LPM
TM150 38 - 380 LPM
TM200 76 - 760 LPM
Accuracy: ± 3.0% (Accuracy can be
improved with field calibration)
Operating Temperature:
Storage Temperature: –40° to +70° C
Weight:
TM050 .141 kg
TM075 .173 kg
TM100 .232 kg
TM150 .368 kg
TM200 .518 kg
Dimensions - cm (W x H x L):
TM050 5.1 x 6.4 x 10.9
TM075 5.1 x 6.9 x 13.5
TM100 5.1 x 7.6 x 15.2
TM150 5.8 x 9.1 x 17.8
TM200 7.1 x 10.4 x 19.1
*
Do not allow fluid to freeze inside meter.
*
0° to +60° C
PARTS
The following replacement parts and acces-
sories are available for the TM Series meters:
Part No. Description
113520-1 Battery Replacement Kit
116001-1 Calibration Container, Large (5 gallon)
901002-52 O-Ring
125508-01 1/2 inch, Turbine Assembly Kit
125510-01 3/4 inch, Turbine Assembly Kit
125512-01 1 inch, Turbine Assembly Kit
125514-01 1-1/2 inch, Turbine Assembly Kit
125516-01 2 inch, Turbine Assembly Kit
125509-01 1/2 inch, Computer Assembly Kit
125511-01 3/4 inch, Computer Assembly Kit
125513-01 1 inch, Computer Assembly Kit
125515-01 1-1/2 inch, Computer Assembly Kit
125517-01 2 inch, Computer Assembly Kit
SERVICE
For warranty consideration, contact your
local distributor. If you need further assis-
tance, contact the GPI Customer Service
Department at:
1-800-835-0113
You will need to:
• Provide information from the decal on
your meter.
• Receive a Return Authorization number.
• Flush any fluid from the meter before
shipping to the factory.
• If possible leave customer installed
fittings or ample length of bare pipe for
reinstallation.
! ! ! CAUTION ! ! !
Do not return the meter without specific
authority from the GPI Customer Service
Department. Due to strict regulations gov-
erning transportation, handling, and disposal
of hazardous or flammable liquids, GPI will
not accept meters for rework unless they
are completely free of liquid residue.
5