Fujitsu PRIMERGY TX150 S6 Options Manual page 78

Figure 62: Fastening the anti-tilt bracket
Ê Fasten the anti-tilt bracket using the two knurled screws (1).
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
V
CAUTION!
After installing the hot-plug power supply a fan calibration must be
started. You will find the description for this procedure in the manual
"ServerStart".
I
You will find the description of the indicators of the power supply module
in the Operating Manual.
78
Conversion standard PS to hot-plug PS
1
et seq..
Options Guide
1
TX150 S6