Fujitsu PRIMERGY TX150 S6 Options Manual page 10

Expansions and conversions Preface
Additional expansion cards in the PCI slots
The system board offers six PCI slots:
– 3 x PCI (32 Bit / 33 MHz)
– 2 x PCI Express x8
– 1 x PCI Express x4
SATA Software RAID
Only possible in SATA base units: the SATA SW RAID 5 functionality will be
activated by installing a license key (RAID key).
COM2 interface
As an option, a second serial interface (COM2) can be provided.
Parallel interface for printers
As an option, a parallel interface can be provided for printers.
Conversion standard power supply to hot-plug power supply
The standard power supply can be replaced by a hot-plug power supply. The
hot-plug power supply consists of two power supply modules. The conversion
kit contains only one power supply module, you have to order the second power
supply separately.
If one power supply module fails, the other power supply module guarantees the
unrestricted operation and the defective power supply module can be replaced
be replaced while the system is operating (hot-plug).
Conversion from a floorstand model to a rack model
The floorstand model can be optionally converted to allow the server to be
installed into any typical rack systems.
10 Options Guide
TX150 S6