Overview; Error Messages List - Ricoh M156 Service Manual

2. ERROR MESSAGES

2.1 OVERVIEW

Error codes will be displayed on the LCD panel if the machine has a problem. These can be
viewed by a customer.

2.1.1 ERROR MESSAGES LIST

Message
The machine was not able to
print the received fax, or the
machine's memory reached
2XXX14
capacity while receiving a fax
because the document was
too large.
ADF Cover Open
The ADF cover is open.
Close ADF Cover
SM Appendix
Causes







2-1
Solutions
The paper tray was empty. Load
paper in the paper tray. See the
user's guide "Loading Paper".
The paper tray did not contain
A4, Letter, or Legal size paper.
Load valid size paper in the tray,
and configure the paper size
settings under [System Settings]
accordingly.
A cover or tray was open. Close
the cover or tray.
There was a paper jam. Remove
the jammed paper. See the
user's guide "Paper Feed
Problems".
A print cartridge was empty.
Replace the print cartridge. See
the user's guide "Replacing the
Print Cartridge".
The received fax was too large.
Ask the sender to resend the
document in parts as several
smaller individual faxes, or to
send at a lower resolution.
Close the cover completely.
M156/M157/M176/M177
Overview