Table of Contents
Advertisement
VoiceFinder AP160 VoIP Gateway Installation Guide Version 1.1
Chapter 2.
Installation Requirements
Warning
The following recommendation should be followed for safe operation of the product.
Ensure VoiceFinder AP160 Gateway is in a dust-free environment before and after
installation.
Make sure to open VoiceFinder AP160 Gateway cover on a flat and safe surface.
To prevent accidents, be careful with ties, scarf, sleeves, and any other loose
clothing from entangling with the chassis.
Avoid any actions that may effect the equipment or the operator.
Electrical Requirements
There are two main sources of electrical problems with the AP160 dial-up VoIP gateway :
Danger
the power supply and static electricity.
This section describes safety recommendations for each case.
AddPac Technology Inc.
Before Installation
Electrical Safety
Operate at a position where immediate shut-off of power supply is possible.
Turn off the power while installing or taking the cover off the equipment.
Avoid operating the equipment alone at potentially dangerous environment.
Do not assume the power is switched off, but always confirm the power status.
Be extremely cautious when operating in a humid environment or with an
ungrounded power extension cable.
Prevention of Static Electricity
The main chip-set of the Gateway is very delicate and misuse may result in
static electrical damage.
21
61/
Advertisement
Table of Contents
