Calibration Actions; Entering Calibration Values; Storing Calibration Constants - Keysight Technologies DAQ970A Service Manual
Data acquisition system
Hide thumbs
Also See for DAQ970A:
- Security manual (19 pages) ,
- Programming manual (393 pages) ,
- Technical overview (26 pages)
Table of Contents
Advertisement
2
Calibration Procedures
Calibration Actions
Entering calibration values
Use measurement commands to set the instrument's measurement parameters
and functions for the mode being calibrated, then enter calibration values with the
following:
Front panel operation:
Remote interface operation:
Storing calibration constants
To store calibration values in non-volatile memory, use the following:
Front panel operation: [Utility] > Calibrate > Save Cal Values
Remote interface operation:
46
[Utility] > Calibrate > Cal Value
After specifying the input value for the calibration step to be performed, press
Perform Cal Step.
Enter cal value:
CALibration:VALue <value>
Perform calibration:
CALibration[:ALL]?
CALibration:STORe
Keysight DAQ970A/DAQ973A Service Guide
Hide quick links:
Advertisement
Table of Contents
