To Change The Security Code - Keysight Technologies DAQ970A Service Manual

Data acquisition system

Hide thumbs Also See for DAQ970A:

Table of Contents

To change the security code

To change the security code, you must first unsecure the instrument, and then

enter a new code. Make sure you have read the security code rules described on

page 39 before attempting to change the security code.

Front panel operation:

1 To change the security code, first make sure that the instrument is unsecured.

2 Press New Code, enter the new security code, and press Done.

3 Verify the new code, and press Yes to confirm the change.

4 Press LOCK to secure the instrument with the new code.

Remote interface operation:

Changing the code from the front panel also changes the code as seen from the

remote interface.

Keysight DAQ970A/DAQ973A Service Guide

Press [Utility] > Security.

CALibration:SECure:CODE <new_code>

Calibration Procedures

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the DAQ970A and is the answer not in the manual?

Daq973a