Instructions For The Installer - Belling 864 Installation And User Instructions Manual

INSTRUCTIONS FOR THE INSTALLER

POSITION
The appliance should be positioned in good light and
free from draughts. Any shelf or cupboard of combustible
material should be at least 750mm above the hob top,
a greater clearance is desirable if discoloration is to be
avoided, otherwise the shelf etc. should be protected.
In accordance with the gas standards, the gas
appliances can be installed as "class 1" (free standing)
or "class 2 subclass 1" (recessed) and, as such, must
comply with the clearances specified in figures 1 and 2
respectively.
The rear wall and surfaces adjacent to or surrounding
the appliance must be able to resist a temperature rise
of 65(C. We recommend fitting ceramic tiles to protect
the surrounding surfaces.
NOTE: When installing the appliance adequate space
must be provided to allow the glass lid (where fitted) to
be opened to its fullest extent.
G83
LEVELLING THE COOKER
• It is important that the cooker is placed on a firm
level surface and that the feet, are adjusted to
ensure that the cooker is perfectly level. An
unlevelled cooker can affect the cooking results.
To level the cooker simply adjust the feet (P) (See
diagram below) screwing up or down as required.
By turning these feet you can align the cooker height
with the adjacent work surfaces.
• The cooker is fitted with two spacers placed at the
rear part of the hob top, which ensures a minimum
distance between the appliance and the rear wall.
They must not be removed.
FIG.1
5
FIG.3
FIG.2