Topcom WRIST 3301 User Manual page 8

TOPCOM BPM Arm 3301
10 Measurement
10.1 Important
1. This monitor automatically switches off 1 minute after the last key operation.
2. To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
3. During the measurement, do not talk or move your arm or hand muscles.
4. After each measurement, the result will be automatically stored. The BPM ARM
3301 has 3 memory zones with each 30 location. Select the desired Memory Zone
before measurement (see §11)
10.2 Procedure
mmHg
mmHg
8
6. When the cuff is positioned properly,
press the Velcro firmly against the pile
side of the cuff. The metal ring will not
touch your skin.
7. Relax your entire body,especially the
area between your elbow and fingers.
Place your elbow on a table so that the
cuff is at the same level as your heart.
Avoid leaning back while the
measurementis being taken.
1. Press the SET button
repeatedly to select the desired
memory zone.
2. Press the START/STOP button
to start measurement. The cuff
will inflate to the level that is
right for you.
3. When the right level is reached,
the cuff will deflate.