Advertisement
Recommended Tools
Hardware Used
• #8x 1-1/4 " Pan Head
Wood Screws
Step 1
Level Bench Height Storage Units
• Position storage units in desired location.
• Level all storage units front-to-back and
side-to-side by rotating adjustable glides.
• Storage units that share same bench top
are to be adjusted to same height.
Step 2
Position Bench Top onto Storage Units
• Place bench top face down on flat, smooth, soft floor,
as not to scratch/mar surface.
• Remove shelves and/or drawers from storage units.
• Carefully flip storage units upside down and place
onto bench top. Position units flush with back and
ends of bench top.
#2 Phillips Head
jsifurniture.com
812.482.3204
800.457.4511
812.482.1548
225 Clay Street / PO Box 231
O
Jasper, Indiana 47546
F
Installation Instructions
Modular Bench Top
Page 1 of 2
Form No. INST-10010
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JSI SWISH
Summary of Contents for JSI SWISH
- Page 1 Installation Instructions Page 1 of 2 Recommended Tools Modular Bench Top #2 Phillips Head Hardware Used • #8x 1-1/4 ” Pan Head Wood Screws Step 1 Level Bench Height Storage Units • Position storage units in desired location. • Level all storage units front-to-back and side-to-side by rotating adjustable glides.
- Page 2 Installation Instructions Page 2 of 2 Modular Bench Top Step 3 Attach Bench Top to Storage Units (continued) • Fasten units to top using factory predrilled holes, #8 x 1-1/4 ” pan head wood screws. Flush to end Flush to back Flush to end Step 4 Attach Bench Ganging Brackets...
Need help?
Do you have a question about the SWISH and is the answer not in the manual?
Questions and answers