Cypress CY15FRAMKIT-002 Quick Start Manual

Serial f-ram development kit

Hide thumbs Also See for CY15FRAMKIT-002:

Table of Contents

Download this manual

CY15FRAMKIT 002 SERIAL F RAM DEVELOPMENT KIT

CY15FRAMKIT-002 Features:

• Excelon 108MHz QSPI F-RAM

• ST NUCLEO-433LC-P compatible Morpho headers (J9, J10)

• Arduino UNO R3 compatible I/O Header (J1 - J4)

• Headers J8 (1A-8A), J8 (1B-8B), J8 (1C-8C) to select Arduino or

Morpho connector signal connectivity to F-RAM device

• J5 header for 1.8-V/3.3-V F-RAM device VDD power supply selection

• J6 header for 1.8-V/3.3-V selection for level shifters. Set this to

the base board's power supply value

QUICK START GUIDE

Morpho Headers (J9, J10)

Headers (J8)

Excelon 4-Mbit F-RAM

Arduino Headers (J1-J4)

Table of Contents

Do you have a question about the CY15FRAMKIT-002 and is the answer not in the manual?

Page 1 Morpho Headers (J9, J10) Headers (J8) Excelon 4-Mbit F-RAM Arduino Headers (J1-J4) CY15FRAMKIT-002 Features: • Excelon 108MHz QSPI F-RAM • ST NUCLEO-433LC-P compatible Morpho headers (J9, J10) • Arduino UNO R3 compatible I/O Header (J1 - J4) • Headers J8 (1A-8A), J8 (1B-8B), J8 (1C-8C) to select Arduino or Morpho connector signal connectivity to F-RAM device •...
Page 2 UNO R3 compatible board • Download the kit rmware from: www.cypress.com/CY15FRAMKIT-002 • Follow the Kit Operation Chapter 3 in CY15FRAMKIT-002 User guide for MCU con guration and programming • Ensure that Jumpers J5 and J6 on Kit are set for 3.3V operation •...