IBM Power System 8335-GCA Manual page 80

Table 22. Sensor information, event description, and service action for the 8335-GTB (continued)
Sensor name (Sensor ID)
v DIMM Func 1 (0x1E)
v DIMM Func 2 (0x1F)
v DIMM Func 3 (0x20)
v DIMM Func 4 (0x21)
v DIMM Func 5 (0x22)
v DIMM Func 6 (0x23)
v DIMM Func 7 (0x24)
v DIMM Func 8 (0x25)
v DIMM Func 9 (0x26)
v DIMM Func 10 (0x27)
v DIMM Func 11 (0x28)
v DIMM Func 12 (0x29)
v DIMM Func 13 (0x2A)
v DIMM Func 14 (0x2B)
v DIMM Func 15 (0x2C)
v DIMM Func 16 (0x2D)
v DIMM Func 17 (0x2E)
v DIMM Func 18 (0x2F)
v DIMM Func 19 (0x30)
v DIMM Func 20 (0x31)
v DIMM Func 21 (0x32)
v DIMM Func 22 (0x33)
v DIMM Func 23 (0x34)
v DIMM Func 24 (0x35)
v DIMM Func 25 (0x36)
v DIMM Func 26 (0x37)
v DIMM Func 27 (0x38)
v DIMM Func 28 (0x39)
v DIMM Func 29 (0x3A)
v DIMM Func 30 (0x3B)
v DIMM Func 31 (0x3C)
v DIMM Func 32 (0x3D)
64
Problem analysis, system parts, and locations for the 8335-GCA, 8335-GTA, 8335-GTB, and 8348-21C
Event description
Configuration Error
Service action
Complete the following steps:
1. If the sensor name is DIMM Func
1, ensure that DIMM 1 is seated
properly. If the sensor name is
DIMM Func 2, ensure that DIMM
2 is seated properly. And so on.
2. If you recently installed or
replaced memory DIMMs, ensure
that the DIMMs are plugged in
the correct memory slots.
3. If the sensor name is DIMM Func
1, replace DIMM 1. If the sensor
name is DIMM Func 2, replace
DIMM 2. And so on. Go to
"8335-GTB locations" on page 121
to identify the physical location
and removal and replacement
procedure.