Garbled Terminal Display - NEC QX-S5500G Series Installation Manual

Installation Guide
QX-S5500G Series Ethernet Switches
4) If the problem persists, contact NEC Support.

7.3.2 Garbled terminal display

I. Symptom
Terminal display is garbled.
II. Solution
To resolve the problem:
1) Verify that the following settings are configured for the terminal:
Baud rate—9,600.

Data bits—8.

Parity—none.

Stop bits—1.

Flow control—none.

2) If the problem persists, contact NEC Support.
7. Maintenance and troubleshooting
7-6