NEC QX-S5500G Series Installation Manual page 143

Installation Guide
QX-S5500G Series Ethernet Switches
Transceiver module
10GBASE-ER-SFP+
10GBASE-ZR-SFP+
CAUTION:
10GBASE-ER-SFP+ and 10GBASE-ZR-SFP+ aren't being supported at SFP+ port of a front panel.

LSWM5SP2PM and LSWM5SP8PM are supporting 10GBASE-ER-SFP+ and 10GBASE-ZR-SFP+.

Cable
CAB-1M-SFP+
CAB-3M-SFP+
CAB-3M-QSFP+/4SFP+
 NOTE:
Use SFP transceiver module items of NEC designation for the transceiver module and the cable used for

switch.
There is a changed possibility for supported transceiver module and cable.

It's possible to connect the SFP+ connector side of the QSFP+/4SFP+ copper cable only at SFP+ port.

Central
wavelength
1550 nm
1550 nm
Table 10-7 10Gbps SFP+ cables available for the 10Gbps SFP+ transceiver modules
10G SFP+ copper cable
10G SFP+ copper cable
40G QSFP+/10G*4 SFP+ copper cable
Connector Fiber diameter
9/125 μm single-mode optical
LC
fiber
9/125 μm single-mode optical
LC
fiber
Description
10-6
10. Appendix C Ports and LEDs
Max
transmission
distance
40 km
(131233.60ft)
80 km
(262467.19ft)
Max
transmission
distance
1 m (3.28ft)
3 m (9.84ft)
3 m (9.84ft)