NEC QX-S5500G Series Installation Manual page 87

Installation Guide
QX-S5500G Series Ethernet Switches
more information about password recovery capability, see Chapter 1 Fundamentals
Configuration Guide in QX-S5500G Switch Series Configuration Guides.
Password recovery capability is enabled.
EXTENDED BOOT MENU
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default configuration
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set switch startup mode
9. Set The Operating Device
0. Reboot
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format file system
Ctrl+P: Change authentication for console login
Ctrl+R: Download image to SDRAM and run
Enter your choice(0-9):
1. Download image to flash
2. Select image to boot
3. Display all files in flash
4. Delete file from flash
5. Restore to factory default
configuration
6. Enter BootRom upgrade menu
Table 6-4 Extended Boot ROM menu options
Option
Download a software image file to the flash.
Specify the main and backup software image file for the next startup.

Specify the main and backup configuration files for the next startup.

This task can be performed only if password recovery capability is
enabled.
Display files on the flash.
Delete files to free storage space.
Delete the current next-startup configuration files and restore the
factory-default configuration.
This option is available only if password recovery capability is disabled.
Access the Boot ROM upgrade menu.
Tasks
6-16
6. Upgrading software