NEC QX-S5500G Series Installation Manual page 132

Installation Guide
QX-S5500G Series Ethernet Switches
LED status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off
II. LSWM5SP2PM
(1) SFP+ port LED
(3) Screw
LED status
Steady green
Flashing green
Table 9-2 The port LED of QSFP+ description
A transceiver module is normally installed on a port. The port has a link and is operating at
40 Gbps.
The port is sending or receiving data at 40 Gbps.
A transceiver module is normally installed on a port. The port has a link and is operating at
10 Gbps.
The port is sending or receiving data at 10 Gbps.
No link is present on the port.
Table 9-3 The port LED of SFP+ description
A transceiver module is normally installed on a port. The port has a link and is operating at
10 Gbps.
The port is sending or receiving data at 10 Gbps.
9-6
9. Appendix B FRUs and compatibility matrixes
Description
(2) SFP+ port
(4) Ejecting lever
Description