Installing The X400 Capacity Cube Cover; Removing The X400 Capacity Cube Cover - Dell EMC PowerProtect X400H Replacement Procedure

Installing the X400 capacity cube cover

Procedure
1. Align the tabs on the X400 capacity cube cover with the guide slots on the X400 capacity
2. Push the X400 capacity cube cover latch down.
3. Using a flat or Phillips head screwdriver, rotate the latch release lock clockwise to the
Figure 7 Removing the X400 capacity cube cover
cube.
The X400 capacity cube cover slides forward, the tabs on the X400 capacity cube cover
engage with the guide slots on the X400 capacity cube and the X400 capacity cube cover
latch locks into place.
locked position.
PowerProtect X400 Appliance Customer Replaceable Unit (CRU) Procedures
Common procedures
17