Replacing a 25-Slot Disk-Array Enclosure
2. Align the bezel with the enclosure.
3. Gently push the bezel into place on the cabinet until it latches.
4. If the bezel has a key lock, lock the bezel with the provided key.
Closing the console
About this task
If you opened the console for access to the enclosure with the part you added or replaced, close
the console using the procedure that follows.
Procedure
1. Grasp the free side of the console, and swing the console to the right to close it
2. Gently push on the console until it is closed.
Verify the operation of the new disk drive
Procedure
1. Rescan all of the disks by entering the disk rescan command
2. After the rescan completes, enter the disk show state command to verify the state of
Dell EMC FS25 SSD Shelf Guide Field Replacement Unit Guide
48
Figure 41 Installing the bezel
Note:
This command does not generate any output. The amount of time it takes to
complete depends on how many disks are attached.
all drives. This command checks that the drive is recognized.
# disk show state
Enclosure
Disk
1
2
3
22 23 24 25
---------
-------------------------------------------------------------------------
1
.
.
.
2
s
R
.
.
.
.
.
.
---------
-------------------------------------------------------------------------
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21
.
.
.
.
.
.
.
.
CL5262
.
.
.
.
.
.
.
.
.
.