Advertisement
Available languages
Available languages
Preparation for Use
Before each use, as well as after each long
break in use, please follow the hygiene steps
and ensure that the nebulizer was cleaned, disin
fected and, if necessary, sterilized after the last
treat ment. See chapter "Hygiene".
After unpacking your nebulizer and its accessories,
please check the completeness.
1. Open the nebulizer by twisting the upper part anti-
clockwise (pic. A).
2. Make sure that the nozzle coat (cone) in the container
fits well on the cone for the air supply (pic. B).
3. Fill the amount of medication prescribed by your
doctor the nebulizer cup (pic. C). The scale on the
container helps you to dose the medication liquid.
Please take care not to exceed the maximum filling
capacity (6 ml).
Close the nebulizer by attaching the upper part and
twisting it clockwise. Take care that the nebulizer is
closed tightly.
First put Inhaltion valve (4) into the nebulizer (1) and
afterwards put in the angle piece (3) and the exhalation
valve (5). Please put the mouthpiece (2) directly on the
angle piece (3) (Fig. E).
When using the mask, see chapter "Use with Mask".
30
Advertisement
