Controlling The System 8/10 Plus Switchers; Manual Remote Control; Rs-232 Control - Extron electronics System 8 Plus User Manual

im Vertrieb von
Controlling the Switcher
Controlling the System 8/10 P

Manual Remote Control

RS-232 Control

www.camboard.de
4-1
CAMBOARD Electronics
Switchers
LUS
The System 8/10 P Switchers can be controlled four ways:
LUS
1. Manual front panel controls (See next page.)
2. Manual, (contact closure) wired remote control
3. Manual infrared remote control
4. RS-232 control (from a host system)
The Manual Remote connector can be used to select inputs by means of dry
momentary contact closures and Tally outputs to drive (user provided) remote
LEDs to indicate which of the inputs have been selected. This is described in
detail on page B-1 of the appendix.
The RS-232 Comm connector provides a serial interface for switching inputs by
means of a host computer (such as a PC) or other third party control system,
such as Crestron® or AMX®. For example, a control program in a PC could be
written in a DOS or Windows® environment. RS-232 programming is described
in Appendix A.
Tel. 07131 911201
Fax 07131 911203
ce-info@camboard.de
Extron • System 8/10 P
LUS
General
S-VIDEO
• User's Manual