Krups Pump espresso Manual page 6

Hide thumbs Also See for Pump espresso:
Table of Contents

Advertisement

Available languages

Available languages

Coffee must always be ground just before it is prepared.
What coffee should you choose?
„ For an aromatic coffee
Choose pure Arabica coffees or those composed mostly of Arabica coffee.
Artisan roasted coffees are preferred as they lend a better complexity and delicateness to
the flavour. For a variety of flavours, try pure origin coffees.
„ For an intense coffee
Choose coffees blended with Robusta – not specifically 100% Arabica – or Italian-roasted
coffees or specific Italian-flavoured coffees.
„ Keep the ground coffee in the fridge as this will lock in the flavour for longer.
„ Do not fill your filter holder to the brim; use the measuring spoon (1 spoon for a 50 ml cup,
2 spoons for 2 x 50 ml cups). Clean off any excess coffee from around the filter holder.
„ If you have not used the appliance for more than 5 days, empty and rinse the water tank.
„ Always make sure the appliance is switched off before removing the tank to fill it or empty
it.
„ Always ensure the appliance is positioned on a flat and stable surface.
OR IF THE MACHINE HAS NOT BEEN USED FOR A
IMPORTANT! do not place heating elements on the appliance.
IMPORTANT! Remove the red protective cap from under the water tank.
IMPORTANT! the safety instructions are part of the appliance.
Please read them carefully before using your new appliance.
RINSING THE SYSTEMS BEFORE FIRST USE
1. RINSING THE ESPRESSO SYSTEM
To ensure your first cup of coffee tastes great, we strongly recommend that you rinse the
espresso machine with hot water, as instructed below:
Ensure you have removed the red protective cap from under the water tank (1).
– Remove the water tank (A) and fill it. The water level should not exceed the "MAX" mark
on the tank and should contain at least 300 ml (= equivalent to 2 large cups (2-3). Then
replace the water tank, ensuring that the cover is closed. (4).
– Plug in your machine. (5).
– Press the On button (C)(6). On the control panel (D), the "On" indicator light switches
on (D2) (7).
4
FIRST USE
LONG PERIOD

Advertisement

Table of Contents
loading

Table of Contents