Summary of Contents for Krups ESPRESSERIA AUTOMATIC
Page 1
The warranty excludes espresso machines that do not work or work incorrectly due to lack of cleaning, failure to remove scale or due to the presence of foreign bodies in the grinder 0845 330 6460 (01)4751947 HELPLINE WEBSITE: www.krups.co.uk 02 9748 7944 0800 700 711...
Page 2
MEANING OF LIGHTS : Lights Meaning Empty Fill tank Clean Calc On / Off coffee grounds The appliance is ready for a coffee or steam cycle. Single flash: the appliance is pre-heating. Double flash: a 2 coffee cycle is in process. Product support information in operating parameters setting mode.
CONTENTS PAGE Description Warning signals Information on espresso coffee Safety instructions BEFORE FIRST USE Measuring water hardness Claris - Aqua Filter System cartridge Settings Setting water hardness Setting coffee temperature Setting automatic cut-off (auto-off) Preparing the appliance Rinsing the coffee circuit Preparing the grinder PREPARING EXPRESSO AND LONG COFFEES Preparing an expresso (from 20 to 70 ml)
Description Water tank handle/lid Coffee bean container lid Coffee bean container Water tank Servicing flap with cup rest Ground coffee setting Coffee volume rotating knob Special maintenance instructions Cleaning tray Steam nozzle Coffee grounds collector Coffee outlets with height adjusting handle Water level floats Removable drip grid and tray Grinding fineness setting knob...
Thank you for having purchased this Krups Espresseria Automatic. We are sure you will enjoy both the quality of the coffee it makes and how easy it is to use. Whether you want a short, strong shot of a ristretto, a good espresso, a bigger and milder lungo, or a creamy cappuccino, your automatic coffee / espresso machine has been designed so you can enjoy the same quality at home as at the bistro, whatever the time of day and right through the week.
BEFORE FIRST USE MEASURING WATER HARDNESS Before using the appliance for the first time or if you have noted a change in water hardness, it is advisable to adapt the appliance to the water hardness. To determine the water hardness, use the measuring stick delivered with your appliance or get in contact with your water authority.
SETTINGS Open the servicing Connect the appliance to Press the ‘Service’ and The digital display for the mains power supply flap. keys at the same parameter setting is but do not turn it on. time. under the servicing flap. SETTING WATER HARDNESS Appliances are pre-set in the factory for hardness level 3.
PREPARING THE APPLIANCE Close the servicing Pull out and fill the Put it back in place by Open the coffee bean Close the coffee bean flap. water tank. pressing firmly and container lid. Add the container lid again. close the lid again. coffee beans (250 g maximum).
PREPARING EXPRESSO AND LONG COFFEES YOUR APPLIANCE IS DESIGNED TO MAKE COFFEE FROM COFFEE BEANS ONLY. When you first make coffee with the machine or after a long period of absence or a cleaning or scale removal procedure, a little steam and hot water will come out of the steam nozzle (priming). Splashing or scalding may occur if the coffee outlets are set too high in relation to the size of the cups.
PREPARING STEAM Steam froths up the milk to make a cappuccino or a caffe latte, for example, and also heats up liquids. As you need a higher temperature to produce steam than to make an espresso, the appliance runs an additional pre-heating phase for steam. Press the light will flash while the appliance heats up.
MAINTAINING YOUR APPLIANCE EMPTYING THE COFFEE GROUNDS COLLECTOR, THE COFFEE TRAY AND THE DRIP TRAY The drip tray receives waste water and the coffee grounds collector receives used coffee grounds. The coffee cleaning tray allows you to eliminate any deposits of coffee grounds. If the light comes Remove the coffee...
Page 12
The cleaning cycle is a continuous cycle. Do not put your hands under the coffee outlets during the cycle. Only use KRUPS (XS3000) cleaning tablets. We cannot be held responsible for any damage that may result from the use of tablets from other brands.
Only use KRUPS scale removal products, citric acid or tartaric acid. You can obtain scale remover from KRUPS Service Centres. In no event must you use conventional starchy sulphonic acid or other products containing that acid.
3 – Second rinsing ± ± 6 6 m m n n At the end of the first rinsing, the ‘calc’ light will flash. A second automatic cycle will last 6 minutes. Once the second rinsing is finished, the ‘calc’ light will go off.
Page 15
Check for correct positioning of the drip tray. The 4 red lights flash permanently. Disconnect the appliance and then bring it back into service. If the failure persists, note the number that appears in the display under the ser- vicing flap and contact the Krups helpline.
Here are some recipes you can make using your Espresseria Automatic: • Cappuccino For a cappuccino, the ideal proportions are as follows: 1/3 hot milk, 1/3 coffee, 1/3 milk froth. • Caffe Latte To make coffee with milk, also often called Latte Macchiato, the proportions are as follows: 3/5 hot milk, 1/5 coffee, 1/5 milk froth.
Need help?
Do you have a question about the ESPRESSERIA AUTOMATIC and is the answer not in the manual?
Questions and answers