Troubleshooting - Krups Pump espresso Manual

„ Wait 5 to 10 minutes, then repeat the process twice more.
„ Make sure that the tank does not fully empty (if removing, refer to the paragraph: FIRST
USE).
B. Rinsing
IMPORTANT!
After descaling, rinse 2-3 times using clean water (no coffee), as described
in the "FIRST USE" paragraph.
Do not forget to rinse the nozzle. The appliance is now descaled and ready for use again.
Your appliance is under guarantee; however, any connection errors, handling mistakes or
use of the machine for purposes other than set out in the instructions will void the guarantee.
This appliance is under guarantee for domestic use. Any other type of use will void the
guarantee.
Repairs to the machine caused by a failure to descale it shall not be covered by the
guarantee.
For any After-Sales or spare parts issues, please consult your retailer or an approved
servicing centre.
PROBLEMS
The coffee is very moist.
The espresso flows too
slowly.
GUARANTEE

TROUBLESHOOTING

POSSIBLE CAUSES
You have not used enough
coffee.
The coffee is too fine, too
coarse or too mealy.
The filter holder is dirty.
The head of the filter holder
is clogged.
Your machine is calcified.
There is too much coffee.
SOLUTIONS
Add more coffee.
Choose slightly larger
coffee grounds.
Clean your filter holder
using the instructions in the
section: CLEANING AND
MAINTENANCE - B. Filter
holder. Clean the coffee
filter as well.
When the appliance has
cooled, clean the grill
through which the water
flows using a damp sponge.
Descale your machine
following the user
instructions provided.
Observe the maximum
limits when filling the filter.
9