Table of Contents
Advertisement
Procedure 29-3 To view nodes a specified number of hops away
where
number is the number of hops
node number is the node number from which to start searching for routing table
information
A display similar to Figure 29-3 appears.
Procedure 29-4 To display the nodes within a specific path
where
p is 1 or 2, and c is 1 to 30 (CAS) or 31 (CCS)
pp is 1 or 9, and c is 1, 2, A or B
node number is the node number from which to start searching for routing table
information
A display similar to Figure 29-3 appears. It shows information on the nodes to which the
2902 MainStreet system can send CPSS messages via the specified path.
29.2
CPSS grooming
In a network made up of Alcatel proprietary equipment, only one channel per pair of
adjacent nodes needs to be dedicated to CPSS messages. However, if Alcatel
proprietary equipment is connected to a network made up of third-party equipment,
the ability to dynamically cross-connect more than one CPSS channel to a single
CPSS carrier is advantageous. This dynamic cross-connection is called CPSS
grooming. Figure 29-4 shows an example of CPSS grooming.
2902 MainStreet Technical Practices
May 2002
90-2906-01
MAINT — MORE — VIEW_NET — HOPS_AWAY
MAINT — MORE — VIEW_NET — VIA_PATH
29 — CPSS maintenance
<number> ↵
<node number> ↵
<Pp-c> or <pp-c> ↵
<node number> ↵
SK000548
SK000549
29-5
Advertisement
Table of Contents
