Table of Contents
Advertisement
11 — Node parameters
Procedure 11-3 To set the flow control
* Default
11.2
Date and time
The date and time are user-configurable.
Date
No Date appears in the header line until the date is set for the first time or after a
system reset or power failure. The format for entering the date is < dd - MMM - yyyy >;
the hyphens must be entered. For example, January 9, 2002 is entered as
<09-JAN-2002>.
Time
Until the time is set, the time elapsed since the last system reset appears in the header
line in the form hh:mm R. For example, 4:03R indicates that 4 hours and 3 minutes
have passed since the last system reset.
When the time is set, real time appears in 12-hour format, followed by the letter A or
the letter P to indicate a.m. or p.m., respectively. The format for entering the time is
< hh : mm A> or < hh : mm P>. Time can be entered in either 12-hour or 24-hour format,
but is displayed only in 12-hour format. For example, 4:30 p.m. is entered as
<4:30P> or <16:30>. If you enter the time in 12-hour format without an <A> or <P>,
the system assumes an <A>.
11-6
SER_PORT_1
FLOW_CTRL
NONE*
XON/XOFF
HOUSE
SER_PORT_2
FLOW_CTRL
NONE*
XON/XOFF
2902 MainStreet Technical Practices
DTR
SK000468
90-2906-01
May 2002
Advertisement
Table of Contents
