Clear Cmos (Jp9); Compactflash Master/Slave Selection (Jp10); Table 1-3: Clear Cmos (Jp9); Table 1-4: Compactflash Master/Slave Selection (Jp10) - Advantech MIC-3357 Instruction Manual

1.5.4 Clear CMOS (JP9)

This jumper is used to erase CMOS data and reset system BIOS
information. Follow the procedures below to clear the CMOS.
1. Turn off the system.
2. Close jumper JP9 (2-3) for about 3 seconds.
3. Close jumper JP9 (1-2).
4. Turn on the system. The BIOS is reset to its default setting.

Table 1-3: Clear CMOS (JP9)

CMOS JP9
Clear
Normal (default)

1.5.5 CompactFlash Master/Slave Selection (JP10)

The MIC-3357 accepts on IDE-compatible CompactFlash memo-
ry card is optional based on an OEM demand. Once a Compact-
Flash socket in added on the MIC-3357 board, please set the
CompactFlash memory as the master or the slave depending on
your need. The default is configured as the slave.

Table 1-4: CompactFlash Master/Slave selection (JP10)

Priority JP10
Master
1 2 3
Slave (default)
Chapter 1 Hardware Configuration 9