Introduction; Installation Of Svga Driver - Advantech MIC-3357 Instruction Manual

4.1

Introduction

The MIC-3357 uses an Intel C&T 69000 chipset as its PCI VGA
controller. The VGA controller has an integrated 2 MB SDRAM, and
can drive CRT displays with resolutions up to 1024 x 768 at 64 K
colors. It supports interlaced and non-interlaced analog monitors
(color and monochrome VGA) in high-resolution modes while
maintaining complete IBM VGA compatibility. Digital monitors (i.e.
MDA, CGA, and EGA) are NOT supported. Multiple frequency
(multisync) monitors are handled as if they were analog monitors.
4.2

Installation of SVGA Driver

The MIC-3357 is supplied with a utility CD-ROM disc that holds the
necessary file for setting up the VGA display under the directory
\MIC3357\VGA. The contents and pathnames of this directory are
listed below:
• MIC3357\VGA\Win95\w95500: VGA utility for Windows 95
• MIC3357\VGA\Win98\w98600: VGA utility for Windows 98
• MIC3357\VGA\Win1000: VGA utility for window 2000
• MIC3357\VGA\WINNT: Utility for Windows NT 4.0
• MIC3357\VGA\OS2: VGA utility for OS/2
Complete the following steps to install the VGA driver. Follow the
procedures in the flow chart that apply to the operating system you
are using with your MIC-3357.
Note:
4 2 MIC-3357 User's Manual
The windows 2000 operating system supports the
Intel C&T 69000 VGA driver. When you install
®
Windows 2000, it will automatically setup the VGA
controller at the same time.