Connecting The Power Cable And Starting The Es450; Connecting The Configuration Pc - Sierra Wireless AirLink ES450 Hardware User's Manual

AirLink ES450 Hardware User Guide

Connecting the Power Cable and Starting the ES450

1. Choose the correct AC adapter plug for your region and slide it into the AC adapter
2. Connect the power cable to the 4-pin power connector on the ES450.
3. Plug the adapter into an AC wall outlet. (If you use a cable to connect the device to a
4. The ES450 starts automatically, as indicated by the flashing LEDs. See

Connecting the Configuration PC

To connect the computer to the ES450 gateway:
1. Use an Ethernet cable to connect the ES450 to the PC.
Rev. 7 July 2019
base.
North America
UK
DC power source, see
Characteristics of the ES450 power supply:
· 100–240 V
· 50/60 Hz.
· 9–36 VDC, 1500 mA output
on page 23 for details.
If the Ethernet port is being used to connect another device, such as an enterprise
router, you can connect the USB port on the ES450 to the computer and configure it to
act as a virtual Ethernet port. See
Power Connector on the ES450 Gateway
Figure 2-2 on page 18.
17
Europe
Australia
on page 30.)
LED Behavior
4116746