Additional Tabletops - Trotec Speedy 360 flexx Operating Manual

Aluminum cutting grid table
Acrylic cutting grid table
Notice
The equipment of the machine may vary depending on the model.
4.3.1

Additional tabletops

Honeycomb tabletop
This robust cutting table offers excellent stability and is
particularly suitable for cutting tasks with parts smaller than
100 mm, as these remain in a flat position after the cutting
The special acrylic cutting grid table prevents reflection
during cutting. It is therefore ideal for cutting acrylics,
laminates or plastic films with parts smaller than 100 mm,
as these remain in a flat position after the cutting.
The honeycomb tabletop is especially suitable for
applications that require minimal reflection and optimum
flatness of the material, e.g. cutting of membrane
keyboards.
The honeycomb tabletop is an additional option for the
vacuum and ferromagnetic engraving tables.
Available in following sizes:
0.5 inch nominal comb size
0.25 inch nominal comb size
Machine overview
43